P240 PNEUMATIC
NAILER
Guide for Replacement Parts
|
|
| Compatibility issues:
|
|
| Feb 2007 | A new valve assembly was introduced on some models. It uses a snap-on design to assemble the actuator components together. Check if your valve assembly uses screw P-544B and check below to order the correct replacement part. See note for more details. |
| Part Number |
Description
|
Notes
|
| P-005 | Cap screw and washers | |
| P-009 | Rectangular ring | |
| P-014 | O-Ring | |
| P-015 | Socket cap screws | |
| P-017 | Plug | |
| P-024 | Spring washer for driving blade | replaces the old block; now included with replacement driving blades; see note. |
| P-034 | Screw & washer | |
| P-046 | Spring & clip for channel | |
| P-051 | "T" Channel | |
| P-054 | Self-adhesive handle grip | see also P-154. |
| P-055 | Pressure valve | optional, see note. |
| P-080 | 2.8 LBS hammer | |
| P-084 | Rubber cap (white) | see instructions. |
| P-087 | Reinforcement block | |
| P-090 | Non-detergent oil (250ml) | |
| P-107 | Gasket | see instructions. |
| P-125 | Bumper | see installation note. |
| P-128 | Hex cap screws | |
| P-148 | Standard "L" channel | |
| P-149 | 18" - 200 cleats "L" optional channel | |
| P-154 | Handle grip | for tools manufactured after Sept 2005; see instructions. |
| P-188 | Adapter for 1/2" solid wood | see Technical Note. |
| P-223 | Driving blade (screw-mount) | with screw; see instructions. |
| P-226 | Reinforcement plate with bushing | |
| P-227 | Dowel pins | |
| P-235 | Base | |
| P-261 | Safety assembly | |
| P-262 | Safety contact element | see installation notes |
| P-285 | Optional "T" gate | |
| P-288 | Plastic base for metric floorings | includes shims and P-986 self-adhesive base. |
| P-323 | Driving blade (threaded-mount) | see note. |
| P-329 | Foot | |
| P-433 | Plastic base | plastic base P-288 comes standard in some countries. |
| P-501 | Head cap | for screw-mount valve. |
| P-506 | Head | |
| P-516 | Main body | |
| P-516B | O-Ring | |
| P-518 | Cylinder | |
| P-518B | Cylinder band-valve | |
| P-522 | Main piston (screw-mount) | see note. |
| P-522A | Piston ring | |
| P-522B | O-Ring | |
| P-541 | Actuator head | for screw-mount valve; see note. |
| P-541A | O-Ring | discontinued, order P-541B. |
| P-541B | Plastic washer | for all actuator head P-541, see note. |
| P-542 | Actuator | for screw-mount valve. |
| P-542A | Wear-ring | |
| P-543 | Main valve | |
| P-544 | Actuator cap | for screw-mount valve. |
| P-544B | Screw | for screw-mount valve. |
| P-601 | Head Cap | for snap-on valve. |
| P-622 | Main piston (threaded-mount) | see note. |
| P-622A | Piston ring | |
| P-632 | "L" Gate | replaced with P-632B |
| P-632B | Alternate "L" Gate | do not require block P-087, see note. |
| P-642 | Actuator | for snap-on valve. |
| P-644 | Actuator cap | for snap-on valve. |
| P-986 | Self-adhesive base | for use with 33/32" flooring. |
© Copyright 1996-2009 Primatech. All right reserved. Disclaimer. Comments to webmaster.