P220 Pneumatic Stapler Replacement Parts

P220 PNEUMATIC STAPLER
Guide for Replacement Parts

The P220 Pneumatic Stapler share most parts with the P210 Pneumatic Nailer. Parts shown in red are specific to the P220 Stapler.

Part Number	Description	Notes
P-004	Bushing
P-005	Cap screw and washers	order also P-128, see note.
P-009	Rectangular ring	see instructions.
P-010	Spring
P-011	O-Ring
P-014	O-Ring
P-015	Socket cap screws
P-017	Plug	order P-055.
P-018	Cylinder
P-019	Piston rings (Set of 3)	see instructions.
P-022	Main piston	see also P-922.
P-024	Spring washer for driving blade	replaces the old block; now included with replacement driving blades; see note.
P-034	Screw & washer
P-036	Reinforcement plate	mounted with P-836 seal insert.
P-037	Driving blade & screw	check compatibility
P-038	Feeder gate
P-039	Gate
P-040	Foot
P-045	Spring & clip assembly
P-053	Feeder channel assembly
P-054	Handle grip	see also P-154.
P-055	Optional safety valve	see note.
P-080	2.8 LBS hammer	also, optional double-head mallet (p/n H-082).
P-084	Rubber cap (white)	see instructions.
P-090	Non-detergent oil (250ml)
P-091	Safety glasses
P-101	Head cap	uses P-402 pin & ring.
P-103	Plastic washer
P-106	Head
P-107	Gasket	see instructions.
P-108	Actuator with rectangular ring
P-116	Main body	for P-106 head only.
P-125	Bumper	see installation note.
P-128	Hex cap screws
P-154	Handle grip	for tools manufactured after Sept 2005; see instructions.
P-188	Adapter for 1/2" solid wood	see Technical Note.
P-212	Plastic piston & rings
P-227	Dowel pins
P-235	Base
P-261	Safety assembly
P-262	Safety contact element	see installation notes
P-288	Plastic base for metric floorings	includes shims and P-986 self-adhesive base.
P-402	Pin & retaining ring	for P-101 cap only.
P-433	Plastic base	Plastic base P-288 comes standard in some countries.
P-800	Tool kit
P-836	Seal insert
P-922	Main piston & rings
P-986	Self-adhesive base	for use with 33/32" flooring.

P220 PNEUMATIC STAPLER Guide for Replacement Parts

P220 PNEUMATIC STAPLER
Guide for Replacement Parts