P210 Pneumatic Nailer Replacement Parts

P210 PNEUMATIC NAILER
Guide for Replacement Parts

Many enhancements were brought to the P210 pneumatic nailer since its introduction. In most cases, older tools can be retrofitted. Check below to identify the correct replacement part. Contact us for more information.

Since September 2001, all P210 tools are manufactured with a larger and stronger driving blade. Those tools are identified as "P210W" onto the serial number label. Those tools require the larger P-223 replacement driving blade.

A new gate & foot assembly with reinforcement block has been introduced in 1999. The older gate, foot and plastic base are obsolete. The P-987 kit is available (including the foot P-329, gate P-532, plastic base P-333 & reinforcement block P-087)

The P210 Pneumatic Nailer now comes standard with a safety contact that prevents the ejection of a cleat if the nailer is not in its working position. The P-961 Safety kit allows to install this safety device on existing P210 tools.

The table below list all the parts of the P200 and P210 Pneumatic Nailers:

Except the feeder channels, foot, gate and safety, all parts are compatible between the P200 and P210 Pneumatic Nailers. Exceptions are noted below.
Many parts were improved since the introduction of the P200 Pneumatic Nailer. When obsolete, the replacement part number is listed below.
The Safety cannot be installed on older P200 nailers.
Replacing older foot, gate and plastic base on the P210 Nailer requires the P-987 kit.

Order the right replacement driving blade:

All P210 tools manufactured before Sept 2001 are fitted with the P-123 driving blade.

All P210 tools manufactured since Sept 2001 and identified as P210W onto their S/N label are fitted with a larger driving blade and should use the P-223 replacement driving blade only.

Part Number	Description	Notes
P-001	Head Cap	uses P-202 pin, replace with P-101 cap.
P-002	Spring pin	order P-202.
P-003	Plastic washer	order P-103.
P-004	Bushing
P-005	Cap screw and washers	order also P-128, see note.
P-006	Head	for P-016 body only, see instructions.
P-007	Gasket	order P-107.
P-008	Actuator	order P-108.
P-009	Rectangular ring	see instructions.
P-010	Spring
P-011	O-Ring
P-012	Plastic piston w/O-Ring	discontinued, order P-212.
P-013	O-Ring	order P-212.
P-014	O-Ring
P-015	Socket cap screws
P-016	Main body	for P-006 head only.
P-017	Plug
P-018	Cylinder
P-019	Piston rings (Set of 3)	see instructions.
P-022	Main piston	see also P-922.
P-023	Driving blade	order P-123.
P-024	Spring washer for driving blade	replaces the old block; now included with replacement driving blades; see note.
P-025	Bumper	order P-125.
P-026	Reinforcement plate with bushing	not compatible with P-261 safety; order P-126.
P-027	Dowel pin	order P-227.
P-028	Bolt	order P-128.
P-029	"L/T" Foot for P200	P200 only.
P-034	Screw & washer
P-035	Base for P200	P200 only.
P-036	Handle for P200	P200 only.
P-046	Spring & clip for channel
P-047	30" - 400 cleats "L/T" channel for P200	P200 only *
P-048	Standard "L/T" channel for P200	P200 only *
P-049	18" - 200 cleats "L/T" channel for P200	P200 only *
P-050	24" - 300 cleats "L/T" channel for P200	P200 only *
P-051	"T" Channel (grey) for P210	P210 only.
P-052	"T" Foot (grey) for P210	P210 only.
P-054	Handle grip	see also P-154
P-055	Pressure valve	see note.
P-061	Safety	P210 only, see P-261 below.
P-080	2.8 LBS hammer
P-084	Rubber cap (white)	see instructions.
P-085	"T" Gate for P200 ("adapter kit")	P200 only *
P-087	Reinforcement block	requires newer P-329 foot & P-532 gate, see kit P-987.
P-088	Adapter for 1/2" solid wood	order P-188.
P-089	Angle adapter kit	.see Technical Note.
P-090	Non-detergent oil (250ml)
P-091	Safety glasses
P-101	Head cap	uses P-402 pin & ring.
P-102	Spring pin	order P-202.
P-103	Plastic washer
P-106	Head	for P-116 body only, see instructions.
P-107	Gasket	see instructions.
P-108	Actuator with rectangular ring
P-112	Plastic piston with rings	order P-212.
P-116	Main body	for P-106 head only.
P-123	Driving blade with screw	for tools manufactured before Sept 2001 only, check compatibility
P-125	Bumper	see installation note.
P-126	Reinforcement plate with bushing	for tools manufactured before Sept 2001 only.
P-127	Dowel pin	order P-227.
P-128	Hex cap screws	see note.
P-129	"L" Foot for P210	order P-329 or kit P-987.
P-132	"L" Gate for P200	P200 only *
P-133	Plastic base	order P-433.
P-135	Base for P210	P210 only.
P-148	Standard "L" channel for P210	P210 only.
P-149	18" - 200 cleats "L" channel for P210	P210 only.
P-150	24" - 300 cleats "L" channel for P210	P210 only.
P-154	Handle grip	for tools manufactured after Sept 2005; see instructions
P-161	Safety & foot assembly	P210 only, see P-261 below.
P-185	"T" Gate for P210 (grey)	P210 only.
P-188	Adapter for 1/2" solid wood	see Technical Note.
P-202	Pin & clip	for P-001 cap only, see also P-101.
P-212	Plastic piston & rings
P-223	Driving blade with screw	P210W only,, check compatibility
P-226	Reinforcement plate with bushing	for P210W only
P-227	Dowel pins
P-229	"L" Foot for P210	order P-329 or kit P-987.
P-232	"L" Gate for P210	order P-532 or kit P-987.
P-233	Plastic base	order P-433.
P-235	Base
P-261	Safety	requires the P-126 reinforcement plate and P-433 plastic base.
P-262	Safety contact element	see installation notes
P-288	Plastic base for metric floorings	includes shims and P-986 self-adhesive base.
P-329	"L" Foot for P210
P-332	"L" Gate for P210	P210 only, order P-532 or kit P-987.
P-333	Plastic base	order P-433.
P-402	Pin & retaining ring	for P-101 cap only.
P-433	Plastic base	Plastic base P-288 comes standard in some countries.
P-532	"L" Gate for P210	for P210 only, manufactured before Sept 2001
P-632	"L" Gate for P210	replaced with P-632B.
P-632B	Alternate "L" Gate for P210	for P210W only; do not require P-087 block; see note.
P-910	Performance Upgrade kit for P200/P210	Contact Primatech
P-922	Main piston & rings
P-948	"L" conversion kit	P210 only.
P-951	"T" conversion kit	P210 only.
P-961	Safety kit	P210 only, see instructions. contact us for ordering.
P-986	Self-adhesive base	for use with 33/32" flooring.
P-987	New gate/foot assembly	P210 only, includes P-329, P-532, P-433, P-087. S ee instructions.
P-990	Parts kit - screws & washers
P-991	Parts kit - rings

P210 PNEUMATIC NAILER Guide for Replacement Parts

P210 PNEUMATIC NAILER
Guide for Replacement Parts