Primatech Nailing System for Hardwood Floorings.

P250A Gym-Edition

Designed exclusively for gym & large surfaces installations, this edition of the P250A nailer or stapler comes installed with bearing-mounted rollers & fully adjustable base.

speeds-up installation

superior comfort & less fatigue

accurate positioning eliminating top nailing

non-marking bearings for unfinished or pre-finished floorings

bearing mounted rollers providing smooth and effortless movement of the tool

non-gliding rollers following board edge

long feeder channel available

fits 3/4" and 33/32" floorings

more on the P250A Gym-Edition
or watch-it in action on

P250F Fixed base

This fixed base version of the expert 250 series is designed for the most popular 3/4" floorings.

more on the P250F

Primatech offers a complete range of hardwood flooring nails and nailers specifically designed for the installation of hardwood flooring. The "L"-type and "T"-type nails are superior fasteners recommended by hardwood flooring manufacturers and associations. Protect your investment by using a fastener that will hold your flooring firmly, still allowing for expansion due to seasonal changes.

Primatech has developed a full line of pneumatic and manual nailers for the DIY, rental, novice or professional floor installer. An integral part of our Nailing System, these tools are designed for improved productivity, less fatigue and better results.

Primatech hardwood flooring nailers

Primatech has developed a full line of pneumatic and manual nailers to answer the need in the market for reliable tools for the DIY, rental, novice or professional floor installer.
Our line was specifically designed for virtually all types of tongue and groove hardwood floors, from 9/32" engineered wood to 33/32" solid wood.
Primatech has always showed a strong commitment to R&D since its debut 25 years ago. A new (patented) valve in 1989 powered the P200, the first pneumatic tool specifically designed for the installation of hardwood flooring. A completely redesigned valve and striking system (patented) was introduced in 2004 with the P240 pneumatic nailer. In 2007, the new modular engine (patent pending) was introduced with the P250 and Q550 nailers. Check our Primatechnology Update chart.
Check our chart for the appropriate nail and nailer for your application.

P250 & Q550 Powered Pneumatic Nailers & Staplers

Revolutionary modular engine - the whole firing valve and piston assembly can be accessed or assembled in just one minute, without any tools.

Featuring a continuously adjustable base to precisely fit most floorings.

GYM-Edition - Designed exclusively for gym & large surfaces installations, this edition of the P250A tool has an extended range for 33/32" floorings and comes installed with bearing-mounted non-marking rollers.

P240 & P260 Hi-Performance Pneumatic Nailers & Staplers

Clearly ahead - the P240 & P260 Hi-Performance pneumatic tools has been entirely designed and manufactured by Primatech development team, working closely with the flooring manufacturers and the professional installers. Among many features: short design to get real close to the end wall and powerful yet soft stroke for increased precision.

P210 & P220 Pneumatic Nailers & Staplers

This classic - the first tool designed specifically for the installation of solid hardwood floorings.

H300 Manual Manual Nailers

Conventional Single-Hit nailer for 3/4" to 33/32" solid hardwood floorings

H330 PRO Multiple-Hits Manual Nailers

Manual nailer allowing to fully countersink nails in several strokes

Q500 & Q510 18ga Manual Nailers

Manual nailers for the installation of 3/8" to 5/8" solid hardwood floorings. The Q510 features a QUICK-LOCK adjustable base with integral tapping block.

TRAKEDGE
Adapter Plate for Factory Finished Flooring

Sets the tool at a perfect position and moves the nailer guide plates away from the delicate top edge.

A-800 Extension Handle

The new A-800 ergonomic extension handle allows to operate the nailers at a higher or lower position. It can be easily set and locked at any position, thus providing a better tool control. it improves ease and stability when sliding the tool sideways.

Primatech hardwood flooring nails

Professional contractors have known for long that the nail down method saves time on labor and reduces overall material cost. Nails reduce material costs by eliminating adhesive cost and the use of solvents for cleanup. They save job time by eliminating adhesive set-up times and troweling. The naildown method allows traffic on the new floor immediately after installation.

Specifically designed for the application of hardwood flooring, Primatech offers a complete range of die-cut hardwood flooring nails. The sharp tip and edges cut through the wood - preventing tongue splitting. Primatech is the only manufacturer to offer you both the universal "L"-type head and also the standard "T"-type head - the choice is yours.

Primatech "L" and "T"-type nails will operate in Primatech nailing machines, manual and pneumatic, and also in all major brand nailing equipment manufactured for use with hardwood flooring nails. Our complete selection includes:

Regular L type nails: 2", 1-3/4" and 1-1/2"

T-type nails: 2" and 1-1/2"

18GA L-type nails for thin solid floorings: 1-3/4", 1-1/2" and 1-1/4"

Also available in stainless steel for very special situations.

Check our chart for the appropriate nail for your application.

Insist on Primatech nails for clips that stay in one piece for faster loading.

Performance Tools for Beautiful Hardwood Floors