The P240 Hi-Performance flooring nailer is a significant improvement upon the industry standard P210 nailer. Its advanced compact firing valve optimizes job efficiency by getting the installer 4½" closer to the end wall - up to two additional boards closer!
- Powerful and smooth - no misfire & no recoil effect
- Perfectly balanced tool with a low center of gravity for better control
- oil-free, although minimal lubrication will prolong seal life
Compact head assembly
- Large head cap - mallet strike can be from any angle
- Can get 2 boards closer to end walls
- only requires a light mallet impact to fully set the nail
Save time and make for a more profitable & efficient jobsite by nailing up to two boards closer to the end wall.
datasheet
Video clipInnovative Air Valve
- Hi-speed discharge valve, reduced air consumption
- Operates at 80 psi
- Will perfectly countersink the nail, independently of the striking force
Simplified Maintenance
- Low & easy maintenance - no special skills required to service this tool
- Access to complete valve assembly, seals and other pneumatic components in one minute!
- Opening the head assembly requires only one standard Allen wrench.
Other standard features
- For all types of hardwood floorings, from 3/4" to 33/32" (19 -26mm); 1/2" to 5/8" with P-188 optional adapter (13-16mm)
- Exclusive contact safety preventing accidental nail ejection
- Exclusive feeder for QUICK LOADING
- Operates with standard 1-1/2", 1-3/4" or 2" L-type nails (38, 45 or 50mm)
- May be ordered or converted to operate with the optional 1-1/2" or 2" T-type nails (38 or 50mm)
- Plastic base preventing damages to the surface of the wood
- Supplied with 2.5 lbs (1.1kg) mallet
Optional TRAK-EDGE Adapter Plate
Adapter Plate for Factory Finished Flooring
- Sets the tool at a perfect position and moves the nailer guide plates away from the delicate top edge.
- Short front overhang for closer racking
- Exclusive, integrated dual action tapping block
- Cut-away view window for precise side match alignment
Optional Extension handle
The A-800 ergonomic extension handle allows to operate the nailers at a higher or lower position. It can be easily set and locked at any position, thus providing a better tool control. It improves ease and stability when sliding the tool sideways.
