Cleats

Fasteners

 

Nailing or stapling down wood floors is the most common installation method. The process involves nailing or stapling the wood flooring directly to a wood subfloor. Typically, the flooring is blind nailed through the tongue into the wooden subfloor so that the nails are not visible after the flooring is installed. This installation method works for solid, engineered, some bamboo wood floors, domestic and exotic.

 

Cleats

 

Specifically designed for the application of hardwood flooring,

 

Primatech steel cleats are ideal for securing various types of wood strips or planks to bases such as plywood or joists.

 

Each cleat features a sharp set of barbs on each side to provide just the right amount of holding power.

 

This design allows floors to expand and contract with seasonal cycles, thereby preserving their integrity and providing a lifetime of performance.

 

  • Collated tape to hold nails together and eliminate waste due to break-up
  • Sturdy steel that won’t bend, even after multiple hits

 

Cleat nails minimize wood splitting and still allow for expansion and contraction of flooring material.

 

 

16 Gauge "L" Shaped Hardwood Flooring Cleat
For 1/2" to 33/32" (12 mm to 26 mm) tongue and groove flooring.
image
buy now 

Compatible with Primatech models:

 

250AL, 250FL, 245FL, 240FL, 210FL, 330L, 300L, 100

 

2"

 

Box

1 000

Case

5 000 

1 ¾"

 

Box

1 000

Case

5 000

1 ½"

 

Box

1 000

Case

5 000

 

16 Gauge "T" Shaped Hardwood Flooring Cleat
For 1/2" to 33/32" (12 mm to 26 mm) tongue and groove flooring.
image
buy now 

Compatible with Primatech models:

 

250AT, 250FT, 245FT, 240FT, 210FT, 330T, 300T

 

2"

 

Box

1 000

Case

10 000 

1 ½"

 

Box

1 000

Case

10 000

 

 

Stainless steel

 

Use on ACQ treated materials as well as on composite decking, boat building or any applications that require a non-corrosive fastener. These nails meet the specific needs of ACQ Nailing applications.

 

For 1/2" to 33/32" (12 mm to 26 mm) flooring. To be used for special applications where corrosion resistance is required.

16 Gauge "L" Shaped Hardwood Flooring Cleat (stainless)
For 1/2" to 33/32" (12 mm to 26 mm) tongue and groove flooring.
image
buy now 

Compatible with Primatech models:

 

250AL, 250FL, 245FL, 240FL, 210FL, 330L, 300L, 100

 

   2" L

 

Box

1 000

Case

5 000 

   1 ½" L

 

Box

1 000

Case

5 000

 

16 Gauge "T" Shaped Hardwood Flooring Cleat (stainless)
For 1/2" to 33/32" (12 mm to 26 mm) tongue and groove flooring.
image
buy now 

Compatible with Primatech models:

 

250AT, 250FT, 245FT, 240FT, 210FT, 330T, 300T

 

   2" T

 

Box

1 000

Case

5 000 

 

18 Gauge "L" Shaped Hardwood Flooring Cleat
For 3/8" to 3/4" (8 mm to 19 mm) solid,engineered and some bamboo flooring.
image
buy now 

Compatible with Primatech models:

 

550AL, 510, 500

 

1 ¾"

 

Box

1 200

Case

6 000 

1 ½"

 

Box

1 200

Case

6 000

1 ¼"

 

Box

2 000

Case

10 000

 

 

 
Disclaimer | Produced by > IC Zones Primatech © 2017 All rights reserved