buy now 

Flexible air hose # A201 more info (PDF)



• Resistant and flexible at sub zero temperatures

• High quality technopolymer air hose

• 35% lighter than rubber hoses

• Non-marking outer cover

• Pin pricked outer cover prevents bursting

• Easily re-coiled / No memory

• Resistant to lubricants and abrasion

• Rubber guard at both ends


300 psi

1/4" x 50" x 1/4" Male



-40 /+65 °C

-40 /+149 °F





industrial brass

quick coupler and steel plug included



buy now 

A400 PRIM-JACK - description

The PRIM-Jack A400 tightening jack is a professional tool offering a durable design capable of withstanding the rigors of daily use. Constructed with the best material available and designed with the professional installer in mind, it is a precision-built tool that can deliver more than a ton of force and will provide you with years of quality service. The PRIM-Jack tightening jack is designed to hold flooring strips tight and keep them in place for nailing. It will also straighten crooked or bowed flooring strips and hold in the nailing position by removing the tongue grip plate and securing flush to the sub floor. It can apply more than a ton of force and provide the hold necessary to free the installer's hands for nailing. The PRIM-Jack is designed as one tool that will both push or pull the flooring strips tight. With its removable shoe, you can efficiently position the jack on the floor or in the field of flooring without damaging the flooring, thereby enabling hands-free operation for nailing. The tool's base features a non-stick coating to help protect prefinished floors. The PRIM -Jack is designed to be used with all thicknesses of wood floors.


buy now 

A800 Extension Handle - description

The PRIMATECH A800 ergonomic extension handle allows to operate the nailers at a higher or lower position. It can be easily set and locked at any position, thus providing a better tool control.


Compatible with Primatech models:


  • 300 & 330 manual nailers
  • 210 pneumatic nailers manufactured since 2000
  • all pneumatic 240 nailers or 220 & 260 staplers
  • all Primpact 250 and 550 pneumatic tools



P-248A - 200 nails capacity
buy now 

LoadXtend - description


  • The LoadXtend magazine holds more fasteners in the same channel length than any other tool, to let you load when you want, as needed. The Stapler Elbow magazine can hold up to 6 sleeves of staples (276) and makes for longer run without the need to stop.



You can now reload before your magazine is empty and keep your installation pace. The LoadXtend allows for reloading extra clips on the fly, therefore saving time and avoiding unwanted interruptions.


Its exclusive pusher will remain locked into a pre-armed position allowing the tool to be fed by gravity. With less than one strip to go the LoadXtend mechanism engages automatically and operates in a conventional way by simply applying pressure on the the fasteners.


The LoadXtend channel magazine is factory installed on the 250 L or S Series. This high-capacity enhancement accepts 200 nails in the same length of channel as the former regular 100 nail capacity, whereas it can take 300 nails in its extended version. It is also offered as an accessory for previously acquired 250L nailers.

Extra feature : specifically designed for the Expert installer, the 300 nail format does not affect the balance of the tool.  


P-248A - 200 nails / 2 strip  capacity

P-249A - 300 nails / 3 strip capacity

P-253A - 138 staples / 3 strip capacity


Disclaimer | Produced by > IC Zones Primatech © 2018 All rights reserved